View ADG442BRZ_6484883.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lc 2 mos quad spst switches adg441/adg442/adg444 rev. a in fo rmation furn ished by an alog d e v i c e s is believed to be accurate and reliable. how e ver, n o resp on sibili ty is assume d b y a n alog de vices fo r its use, nor for an y i n fri n geme nt s of p a t e nt s or ot h e r ri ght s o f th ird parties th at may result fro m its use . s p ecificatio n s subj ec t to ch an g e witho u t n o tice. no licen s e is g r an te d by implicati o n or ot herwi s e u n der a n y p a t e nt or p a t e nt ri ghts of analog de v i ces. trademarks an d registered tra d ema r ks are the prop erty o f their respective ow ners. one technolog y way, p.o . box 9106, norwood, ma 02062-9106, u.s.a. t e l: 781. 329. 4 700 www.analog.com fax: 781. 461. 31 13 ? 2005 a n alog de vices, i n c. al l r i ght s r e ser v ed . features 44 v supply m a ximum ratings v ss to v dd anal og signal range low on resistance (<70 ?) low ?r on (9 ? max) low r on match (3 ? max) low power dissipation fast switching times t on < 11 0 ns t of f < 60 ns low leakage currents (3 na ma x) low charge inj e ction (6 pc max) break-before- make switchin g action latch-up proof a grade plug-in upgrad e for dg2 01a/ adg2 01a, dg2 02a/ad g 202 a, dg211/a d g2 1 1 a plug-in replace m ent for dg4 4 1 /dg442/d g 44 4 applic ati o ns audio an d v i de o switching automatic test equipment precision data acquisition battery-powered systems sample-and-h old systems communication systems general description the ad g441 , ad g442, an d ad g444 a r e mo n o li t h ic cm o s de vices t h a t com p r i s e o f fo ur in d e p e nden t ly s e le c t ab le sw i t ches. t h ey a r e d e s i g n ed o n a n e n h a n c ed l c 2 mos p r o c ess t h a t p r o v ide s lo w p o w e r dis s i p a t io n yet g i v e s hig h swi t c h in g sp e e d a nd lo w on r e sist a n c e . the o n r e sis t ance p r o f i l e is v e r y f l a t o v er t h e f u l l a n alog in p u t r a nge, w h i c h e n su re s go o d l i ne a r i t y a n d l o w d i s t or t i on w h e n swi t c h in g a u dio sig n als. h i g h s w i t c h in g sp e e d als o mak e s t h e p a r t s s u i t a b le for vide o sig n a l sw i t c h in g. c m os co n s tr ucti o n e n su re s u l t r a l ow p o we r diss i p a t ion, ma k i ng t h e p a r t s ide a l l y su i t e d for p o r t abl e and b a tte r y -p o w e r e d inst r u me n t s . t h e ad g441, ad g 442, a nd ad g4 44 co n t a i n f o ur indep e n d en t s p s t s w i t ch es. e a c h s w i t ch o f t h e ad g441 and ad g444 t u r n s o n w h e n a log i c lo w is a p p l ie d to th e a p p r o p r i a t e co n t r o l in p u t. the ad g442 s w i t ch es a r e t u r n ed o n wi th log i c hig h on t h e a p p r o p r i a t e con t r o l in p u t. th e ad g441 an d ad g444 swi t ch es func tio n a l block di agram 05233-001 in1 s1 d1 in2 s2 d2 in3 s3 d3 in4 s4 d4 in1 s1 d1 in2 s2 d2 in3 s3 d3 in4 s4 d4 adg441 adg444 adg442 switches shown for a logic 1 input fi g u r e 1 . dif f er in tha t t h e ad g444 r e q u ir es a 5 v log i c p o w e r s u p p l y t h at i s ap p l i e d t o t h e v l p i n. the ad g441 and ad g442 do n o t ha ve a v l pi n , t h e l o g i c p o w e r s u pp l y i s g e ne r a t e d i n te r n a l l y b y an on - c h i p volt age ge ne r a tor . e a c h s w i t ch cond uc ts eq ual l y we l l in both dir e c t io n s w h en o n a nd has a n in p u t sig n al ra n g e tha t ext e n d s t o the p o w e r s u p p lies. i n t h e o ff co n d i t io n, sig n al le ve ls u p t o th e s u p p lies a r e b l o c k e d . al l swi t ch es exhi b i t b r e ak-b e fo r e -mak e s w i t chi n g actio n f o r use in m u l t i p lex e r a p p l ica t io n s . i n her e n t in t h e desig n is t h e l o w cha r ge in j e c t i o n fo r mini m u m t r a n sie n ts w h en sw i t c h in g t h e d i gi tal in p u t s . product highlights 1. e x t e n d e d sig n a l ra n g e . th e ad g441a/ad g 44 2a/ ad g444a a r e f a b r ic a t e d o n an enhan c ed lc 2 mos , t r enc h - is ola t e d p r o c es s , g i vin g an in cr e a s e d sig n al ra n g e tha t ext e n d s t o t h e su p p l y ra ils. 2. l o w p o w e r di ssi p a t io n. 3. lo w r on . 4. t r e n c h i s ol a t i o n g u ard s ag ai n s t l a tch - up for a g r a d e p a r t s . a d i e l ectri c tr e n ch se pa ra t e s t h e p a n d n c h a n n e l tra n si s t o r s th e r eb y p r ev e n t i n g la t c h - u p ev en un d e r s e v e r e o v e r v o l t a g e co ndi t i on s. 5. b r eak - be f o r e - m ak e sw i t ch i n g. t h i s p r ev en t s ch a n n e l s h o r t i n g w h e n t h e s w i t ch es a r e co nf igur e d as a m u l t i p lexer . 6. sin g le -s u p pl y op era t ion. f o r a pplica t ion s w h ere t h e a n alog sig n al is uni p ol a r , th e ad g441 /ad g 442 /ad g 444 ca n be op e r a t e d f r om a s i ng l e - r ai l p o w e r supply . t h e p a r t s are f u l l y sp e c if ie d w i t h a s i ng l e 1 2 v p o we r su p p ly .
adg441/adg442/adg444 rev. a | page 2 of 16 table of contents specifications ..................................................................................... 3 dual supply ................................................................................... 3 single supply ................................................................................. 4 absolute maximum ratings ............................................................ 5 esd caution .................................................................................. 5 pin configurations and function descriptions ........................... 6 typical performance characteristics ............................................. 7 test circ u its ........................................................................................9 ter mi nolo g y .................................................................................... 11 trench isolation .............................................................................. 12 outline dimensions ....................................................................... 13 ordering guide .......................................................................... 14 revision history 5/05data sheet changed from rev. 0 to rev. a changes to format .............................................................universal deleted cerdip package and t grade ..........................universal changes to features and product highlights ............................... 1 changes to test conditions in table 2 .......................................... 4 changes to figure 11........................................................................ 8 changes to trench isolation section ........................................... 12 updated outline dimensions ....................................................... 13 changes to ordering guide .......................................................... 14 4/94Crevision 0: initial version
adg441/adg442/adg444 rev. a | page 3 of 16 specifications dual supply 1 v dd = +15 v 10%, v ss = ?15 v 10%, v l = +5 v 10% (adg444), gnd = 0 v, unless otherwise noted. table 1. b version parameter +25c ?40c to +85c unit test conditions/comments analog switch analog signal range v ss to v dd v r on 40 ? typ v d = 8.5 v, i s = ?10 ma 70 85 ? max v dd = +13.5 v, v ss = ?13.5 v ?r on 4 ? typ ?8.5 v v d +8.5 v 9 ? max r on match 1 ? typ v d = 0 v, i s = ?10 ma 3 ? max leakage currents v dd = +16.5 v, v ss = ?16.5 v source off leakage i s (off) 0.01 na typ v d = 15.5 v, v s = ? 15.5 v 0.5 3 na max see figure 15 drain off leakage i d (off) 0.01 na typ v d = 15.5 v, v s = ? 15.5 v 0.5 3 na max see figure 15 channel on leakage i d , i s (on) 0.08 na typ v s = v d = 15.5 v 0.5 3 na max see figure 16 digital inputs input high voltage, v inh 2.4 v min input low voltage, v inl 0.8 v max input current i inl or i inh 0.00001 a typ v in = v inl or v inh 0.5 a max dynamic characteristics 2 t on 85 ns typ r l = 1 k?, c l = 35 pf; 110 170 ns max v s = 10 v; see figure 17 t off 45 ns typ r l = 1 k?, c l = 35 pf; 60 80 ns max v s = 10 v; see figure 17 t open 30 ns typ r l = 1 k?, c l = 35 pf; charge injection 1 pc typ v s = 0 v, r s = 0 ?, c l = 1 nf; 6 pc max v dd = +15 v, v ss = C15 v; see figure 18 off isolation 60 db typ r l = 50 ?, c l = 5 pf; f = 1 mhz; see figure 19 channel-to-channel crosstalk 100 db typ r l = 50 ?, c l = 5 pf; f= 1 mhz; see figure 20 c s (off) 4 pf typ f = 1 mhz c d (off) 4 pf typ f = 1 mhz c d , c s (on) 16 pf typ f = 1 mhz power requirements v dd = +16.5 v, v ss = ?16.5 v i dd digital inputs = 0 v or 5 v adg441/adg442 80 a max adg444 0.001 a typ 1 2.5 a max i ss 0.0001 a typ 1 2.5 a max i l (adg444 only) 0.001 a typ v l = 5.5 v 1 2.5 a max 1 temperature range is: b ve rsion: ?40c to +85c. 2 guaranteed by design, not subject to production test.
adg441/adg442/adg444 rev. a | page 4 of 16 single supply 1 v dd = +12 v 10%, v ss = 0 v, v l = +5 v 10% (adg444), gnd = 0 v, unless otherwise noted. table 2. b version parameter +25c ?40c to +85c unit test conditions/comments analog switch analog signal range 0 to v dd v r on 70 ? typ v d = +3 v, +8 v, i s = ?5 ma 110 130 ? max v dd = 10.8 v ?r on 4 ? typ 3 v v d 8 v 9 ? max r on match 1 ? typ v d = +6 v, i s = ?5 ma 3 ? max leakage current v dd = 13.2 v source off leakage i s (off) 0.01 na typ v d = 12.2 v/1 v, v s = 1 v/12.2 v 0.5 3 na max see figure 15 drain off leakage i d (off) 0.01 na typ v d = 12.2 v/1 v, v s = 1 v/12.2 v 0.5 3 na max see figure 15 channel on leakage i d , i s (on) 0.08 na typ v s = v d = 12.2 v/1 v 0.5 3 na max figure 16 digital inputs input high voltage, v inh 2.4 v min input low voltage, v inl 0.8 v max input current i inl or i inh 0.00001 a typ v in = v inl or v inh 0.5 a max dynamic characteristics 2 t on 105 ns typ r l = 1 k?, c l = 35 pf 150 220 ns max v s = 8 v; figure 17 t off 40 ns typ r l = 1 k?, c l = 35 pf 60 100 ns max v s = 8 v; figure 17 t open 50 ns typ r l = 1 k?, c l = 35 pf charge injection 2 pc typ v s = 6 v, r s = 0 ?, c l = 1 nf 6 pc max v dd = 12 v, v ss = 0 v; see figure 18 off isolation 60 db typ r l = 50 ?, c l = 5 pf, f = 1 mhz; see figure 19 channel-to-channel crosstalk 100 db typ r l = 50 ?, c l = 5 pf, f = 1 mhz; see figure 20 c s (off) 7 pf typ f = 1 mhz c d (off) 10 pf typ f = 1 mhz c d , c s (on) 16 pf typ f = 1 mhz power requirements v dd = 13.2 v i dd digital inputs = 0 v or 5 v adg441/adg442 80 a max adg444 0.001 a typ 1 2.5 a max i l (adg444 only) 0.001 a typ v l = 5.5 v 1 2.5 a max 1 temperature range is: b ve rsion: ?40c to +85c. 2 guaranteed by design, not subject to production test.
adg441/adg442/ad g444 r e v. a | pa ge 5 o f 1 6 absolute maximum ratings t a = 2 5 c u n l e s s ot he r w i s e not e d. table 3. p a r a m e t e r r a t i n g v dd to v ss 44 v v dd to gnd ?0.3 v to +25 v v ss to gnd +0.3 v to ?25 v v l to gnd ?0.3 v to v dd + 0.3 v analog, digital i n puts v ss ? 2 v to v dd + 2 v or 30 ma, whichever oc curs first continuous current, s or d 30 ma peak current, s or d (pulsed at 1 ms, 10% duty c y cle max) 100 ma operating tem p erature range indus t rial (b vers io n) ?40c to +85c storage temperature range ?65c to +150c junction tempe r ature 150c lead temperature, soldering (10 sec) 300c plastic package, power dissi pati on 470 mw ja , thermal impedance 177c/w lead temperature, soldering (10 sec) 260c soic package, power dissipation 600 mw ja , thermal impedance 77c/w lead temperature, soldering vapor phase (60 sec) 215c infrared (15 sec) 220c s t r e s s es a b o v e t h os e list e d u nde r a b s o l u te m a xi m u m r a t i n g s ma y ca us e p e r m an e n t da ma g e t o t h e de vi ce . this is a s t r e s s ra t i ng o n ly ; f u nc t i on a l op e r a t i o n of t h e d e v i c e a t t h e s e or a n y ot he r c o n d it i o ns ab o v e t h o s e l i ste d i n t h e op e r a t i o n a l s e c t i o ns of t h i s sp e c if ica t ion is n o t im plie d . e x p o sur e to a b s o l u te max i m u m r a t i ng co ndi t i on s fo r ex tende d p e r i o d s ma y a f fe c t de vice rel i a b i l i t y . on ly o n e abs o lu te m axi m u m ra ti n g ma y b e a p p l i e d a t a n y o n e tim e . table 4. truth table adg4 41/ad g4 44 in adg4 42 in switch condition 0 1 on 1 0 off esd caution esd (electrostatic discharge) sensitive device. ele c tr ostatic charg e s as high as 4000 v readily accumulate on the human body and test eq uipment and can discharg e wit h out detection. althou gh this product features proprietary esd protection circu i try, permanent dama ge may occur on devices subjected to high energy electrostatic discharges. theref ore, prop er esd precautions a r e recommended to avoid perform a nce degradation or l o ss of functiona l ity.
adg441/adg442/ad g444 r e v. a | pa ge 6 o f 1 6 pin conf igurations and f u ncti on descriptions in1 1 d1 2 s1 3 v ss 4 in2 16 d2 15 s2 14 v dd 13 g nd 5 nc 12 s4 6 s3 11 d4 7 d3 10 in4 8 in3 9 nc = no connect adg441 adg442 top view (not to scale) 05233-002 f i g u re 2. a d g 4 4 1 / a dg44 2 (di p /s oic ) in1 1 d1 2 s1 3 v ss 4 in2 16 d2 15 s2 14 v dd 13 g nd 5 v l 12 s4 6 s3 11 d4 7 d3 10 in4 8 in3 9 adg444 top view (not to scale) 05233-003 fi g u r e 3 . a d g 4 4 4 ( d i p / s o i c ) table 5. adg 4 41/adg442 pi n function des c riptions pin no. mnemonic description 1, 8, 9, 16 in1 to in4 logic control input. 2, 7, 10, 1 5 d 1 t o d 4 drain terminal. may be an input or output. 3, 6, 11, 1 4 s 1 t o s 4 source terminal. may be an input or output. 4 v ss m o st negative power supply potential in dual supplie s. in single- s upply a pplic ations, it may be conne cted to ground. 5 gnd ground (0 v ) ref e rence. 1 2 n c no c o n n e c t . 1 3 v dd m o st po sit i v e p o we r su pp ly p o te nti a l . ta ble 6. a d g 4 44 pi n f u nct i o n d e s c ri pt i o ns pin no. mnemonic description 1, 8, 9, 16 in1 to in4 logic control input. 2, 7, 10, 1 5 d 1 t o d 4 drain terminal. may be an input or output. 3, 6, 11, 1 4 s 1 t o s 4 source terminal. may be an input or output. 4 v ss m o st negative power supply potential in dual supplie s. in single- s upply a pplic ations, it may be conne cted to ground. 5 gnd ground (0 v ) ref e rence. 1 2 v l logic power supply (5 v). 1 3 v dd m o st po sit i v e p o we r su pp ly p o te nti a l .
adg441/adg442/ad g444 r e v. a | pa ge 7 o f 1 6 typical perf orm ance cha r acte ristics 05233-005 v d (v s ) (v) 15 ?15 ? 10 ?5 0 5 10 r on ( ? ) 100 80 60 40 20 v dd = +5v v ss = ? 5v v dd = +15v v ss = ? 15v v dd = +10v v ss = ? 10v v dd = +12v v ss = ? 12v t a = 25c fi g u r e 4 . r on a s a f u ncti on o f v d (v s ) : du al s u ppl y 05233-006 t a = 25c v dd = 5v v ss = 0v v dd = 15v v ss = 0v v dd = 12v v ss = 0v v dd = 10v v ss = 0v v d (v s ) (v) 15 0 369 1 2 r on ( ? ) 170 110 130 150 70 90 50 30 10 fi g u r e 5 . r on a s a f u ncti on o f v d (v s ): single sup p l y 05233-007 v d (v s ) (v) 15 ?15 ? 10 ?5 0 5 10 r on ( ? ) 100 80 60 40 20 v dd = +15v v ss = ? 15v 125c 25 c 85 c fi g u r e 6 . r on a s a f u ncti on o f v d (v s ) f o r d i fferent t e mper atur es 05233-008 v s (v d ) (v) 15 ?15 ? 10 ?5 0 5 10 v dd = +15v v ss = ? 15v t a = 25 c leakage current ( n a) 0.02 0.01 0 ? 0.01 ? 0.02 i d (on) i d (off) i s (off) f i g u re 7. l e akag e current s as a f u nc t i on of v s (v d ) 05233-009 frequency (hz) 10m 1k 10k 100k 1m db 120 100 110 70 80 90 60 50 v dd = +15v v ss = ? 15v crosstalk off isolation f i g u re 8. c r os s t alk and o f f is o l at ion v s . f r eque nc y 05233-010 v d (v s ) (v) 12 0 2468 1 0 r on ( ? ) 120 100 60 80 40 20 125 c 25c 85c v dd = 12v v ss = 0v fi g u r e 9 . r on a s a f u ncti on o f v d (v s ) f o r d i fferent t e mper atur es
adg441/adg442/ad g444 r e v. a | pa ge 8 o f 1 6 05233-011 v s , v d (v) 12 0 246 8 1 0 l e akage current (n a) 0.010 0.005 0 ?0.005 ?0.010 i d (off) i s (off) i d (on) v dd = 12v v ss = 0v t a = 25c f i g u re 10. l e akag e current s as a f u nc t i on of v s (v d ) 05233-012 v s (v) 15 ? 1 5 ? 1 2 ? 9 ? 6 ? 3 0369 1 2 charge inj e ction ( p c) 40 20 10 30 0 ?2 0 ?3 0 ?1 0 ?4 0 t a = 25 c v dd = +15v v ss = ? 15v v dd = 12v v ss = 0v f i gure 1 1 . char ge i n jectio n vs . s o u r c e v o l t a g e 05233-013 supply voltage (v) 20 10 12 1 4 16 18 v in = 8v t on t off t (n s ) 120 100 80 60 40 f i g u re 12. swit chi n g ti me v s . b i po la r s u p p ly 05233-014 supply voltage (v) 20 81 0 1 4 12 16 18 t (n s ) 160 140 120 100 80 60 40 20 v in = 8v t on t off f i gure 1 3 . s w i t chin g t i m e vs . s i ngle su p p l y
adg441/adg442/ad g444 r e v. a | pa ge 9 o f 1 6 test circuits sd r on = v 1 /i ds v s v1 i ds 05233-015 f i g u re 14. o n r e s i s t anc e sd v s v d a a i s (off) i d (off) 05233-016 f i g u re 15. o f f l e akag e sd v s v d a i d (on) 05233-017 f i g u re 16. o n l e akag e sd v s v out in v ss gnd v l v dd ? 15v +15v +5v c l 35pf r l 1k ? 3v 50% 50% 50% 90% 90% 50% adg441/adg444 adg442 v in v in v out 3v t on t off 05233-018 0.1 f 0.1 f 0.1 f f i gure 1 7 . s w i t chin g t i m e s sd v s v out in r s v ss gnd v l v dd ?15v +15v +5v c l 1nf 3v v in v out q inj = c l ? v out ? v out 05233-019 f i gure 1 8 . char ge i n jectio n
adg441/adg442/ad g444 rev. a | page 10 of 16 sd v s v out in v ss gnd v ss v dd ?15v +15v +5v r l 50 ? 0.1 f 0.1 f 0.1 f v in 05233-021 f i g u re 19. o f f is ol a t ion sd v s nc v ss gnd v ss v dd ?15v +15v +5v 50 ? 0.1 f 0.1 f 0.1 f v in1 v in2 v out 05233-022 r l 50 ? channel-to-channel crosstalk = 20 log | v s /v out | f i gure 20. channe l-to - c hann el crosstalk
adg441/adg442/adg444 rev. a | page 11 of 16 terminology r on ohmic resistance between d and s. r on match difference between the r on of any two channels. i s (off) source leakage current with the switch off. i d (off) drain leakage current with the switch off. i d , i s (on) channel leakage current with the switch on. v d (v s ) analog voltage on terminals d, s. c s (off) off switch source capacitance. c d (off) off switch drain capacitance. c d , c s (on) on switch capacitance. t on delay between applying the digital control input and the output switching on. t off delay between applying the digital control input and the output switching off. t open break-before-make delay when switches are configured as a multiplexer. crosstalk a measure of unwanted signal which is coupled through from one channel to another as a result of parasitic capacitance. off isolation a measure of unwanted signal coupling through an off switch. charge injection a measure of the glitch impulse transferred from the digital input to the analog output during switching.
adg441/adg442/ad g444 rev. a | page 12 of 16 trench isolation i n t h e ad g441 a, ad g442 a, and ad g444 a, a n ins u l a t i ng o x ide l a yer (t r e n c h) is place d b e tw e e n t h e nmos a nd t h e pmos tra n sis t ors o f e a c h cmo s swi t c h . p a rasi t i c j u n c t i o n s, which o c c u r be tw e e n t h e tran sist o r s in j u n c tion is ola t e d swi t ch es, a r e e l imina t e d , an d t h e r e s u l t is a com p let e l y l a t c h-u p pro o f s w itc h . i n j u n c ti o n i s o l a t i o n , th e n a n d p w e lls o f th e pm o s a n d nm os tra n sis t o r s f o r m a dio d e tha t is r e v e rs e-b i as e d u n der nor m a l op e r a t i o n . h o w e ve r , du r i ng o v e r vo lt a g e c o n d i t i o n s , t h i s dio d e b e com e s fo r w a r d-b i a s e d . a si lico n - co n t rol l e d r e c t if ier (scr) typ e c i r c ui t is fo r m e d b y t h e tw o t r a n sisto r s ca usin g a sig n if ican t am pl if ica t ion o f t h e c u r r en t w h ich, i n t u r n , le ads t o la tch-up . w i t h t r en ch i s ola t io n, t h is di o d e is r e m o ve d , and t h e r e s u l t is a l a t c h-u p p r o o f swi t ch. 05233- 004 buried oxide layer substrate (back gate) trench p-well n-well loco nmos pmos f i gure 21. t r en ch is ol ati o n
adg441/adg442/ad g444 rev. a | page 13 of 16 outline dimensions 16 1 8 9 0.295 (7.49) 0.285 (7.24) 0.275 (6.99) 0.100 (2.54) bsc seating plane 0.015 (0.38) min 0.180 (4.57) max 0.022 (0.56) 0.018 (0.46) 0.014 (0.36) 0.150 (3.81) 0.130 (3.30) 0.110 (2.79) 0.060 (1.52) 0.050 (1.27) 0.045 (1.14) 0.150 (3.81) 0.135 (3.43) 0.120 (3.05) 0.015 (0.38) 0.010 (0.25) 0.008 (0.20) 0.325 (8.26) 0.310 (7.87) 0.300 (7.62) 0.785 (19.94) 0.765 (19.43) 0.745 (18.92) controlling dimensions are in inches; millimeter dimensions (in parentheses) are rounded-off inch equivalents for reference only and are not appropriate for use in design compliant to jedec standards mo-095ac f i gure 22. 16-l ead p l astic d u al in-lin e p a ck age [ p dip ] (n-16) di me nsio ns sho w n i n i n che s a n d ( m il lim e t e r s) controlling dimensions are in millimeters; inch dimensions (in parentheses) are rounded-off millimeter equivalents for reference only and are not appropriate for use in design compliant to jedec standards ms-012ac 16 9 8 1 4.00 (0.1575) 3.80 (0.1496) 10.00 (0.3937) 9.80 (0.3858) 1.27 (0.0500) bsc 6.20 (0.2441) 5.80 (0.2283) seating plane 0.25 (0.0098) 0.10 (0.0039) 0.51 (0.0201) 0.31 (0.0122) 1.75 (0.0689) 1.35 (0.0531) 8 0 0.50 (0.0197) 0.25 (0.0098) 1.27 (0.0500) 0.40 (0.0157) 0.25 (0.0098) 0.17 (0.0067) coplanarity 0.10 45 f i gure 23. 16-l ead standar d s m all o u tline p a ck age [s oi c ] (r-16) di me nsio ns sho w n i n mi ll im e t e r s a n d (i nc he s)
adg441/adg442/adg444 rev. a | page 14 of 16 ordering guide model temperature range package description package option adg441bn ?40c to +85c 16-lead plas tic dual in-line package (pdip) n-16 adg441br ?40c to +85c 16-lead standa rd small outline package (soic) r-16 adg441br-reel ?40c to +85c 16-lead stan dard small outline package (soic) r-16 adg441brz 1 ?40c to +85c 16-lead standard small outline package (soic) r-16 adg441brz-reel 1 ?40c to +85c 16-lead standard small outline package (soic) r-16 adg441bchips die adg441abchips 2 die adg441abn 2 ?40c to +85c 16-lead plastic dual in-line package (pdip) n-16 adg441abr 2 ?40c to +85c 16-lead standard small outline package (soic) r-16 adg441abr-reel 2 ?40c to +85c 16-lead standard small outline package (soic) r-16 adg441abrz-reel 1 , 2 ?40c to +85c 16-lead standard small outline package (soic) r-16 adg442bn ?40c to +85c 16-lead plas tic dual in-line package (pdip) n-16 adg442br ?40c to +85c 16-lead standa rd small outline package (soic) r-16 adg442br-reel ?40c to +85c 16-lead stan dard small outline package (soic) r-16 ADG442BRZ 1 ?40c to +85c 16-lead standard small outline package (soic) r-16 ADG442BRZ-reel 1 ?40c to +85c 16-lead standard small outline package (soic) r-16 adg442abn 2 ?40c to +85c 16-lead plastic dual in-line package (pdip) n-16 adg442abr 2 ?40c to +85c 16-lead standard small outline package (soic) r-16 adg442abr-reel 2 ?40c to +85c 16-lead standard small outline package (soic) r-16 adg442abrz 1 , 2 ?40c to +85c 16-lead standard small outline package (soic) r-16 adg442abrz-reel 1 , 2 ?40c to +85c 16-lead standard small outline package (soic) r-16 adg444bn ?40c to +85c 16-lead plas tic dual in-line package (pdip) n-16 adg444br ?40c to +85c 16-lead standa rd small outline package (soic) r-16 adg444br-reel ?40c to +85c 16-lead stan dard small outline package (soic) r-16 adg444brz 1 ?40c to +85c 16-lead standard small outline package (soic) r-16 adg444brz-reel 1 ?40c to +85c 16-lead standard small outline package (soic) r-16 adg444abn 2 ?40c to +85c 16-lead plastic dual in-line package (pdip) n-16 adg444abr 2 ?40c to +85c 16-lead standard small outline package (soic) r-16 adg444abr-reel 2 ?40c to +85c 16-lead standard small outline package (soic) r-16 adg444abrz 1 , 2 ?40c to +85c 16-lead standard small outline package (soic) r-16 adg444abrz-reel 1 , 2 ?40c to +85c 16-lead standard small outline package (soic) r-16 1 z = pb-free part. 2 a = trench isolated.
adg441/adg442/adg444 rev. a | page 15 of 16 notes
adg441/adg442/ad g444 rev. a | page 16 of 16 notes ?2005 a n alo g d e vi ces, inc. all rights reserve d . tra d emar ks an d registered tra d emar ks are the prop erty of their respective owners . c00396C0 C 5/05(a)

▲Up To Search▲

Price & Availability of ADG442BRZ

	To Download ADG442BRZ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .